AST NJ220 E cylindrical roller bearings

Stabilizing ring:SR-11-9; Appropriate attachment bolt size G:0.625 in; P90°:27.1 kN; P180°:19.1 kN; H2:23.813 mm; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:81.3 N·m; Housing:SAF 511; S:4.763 mm; Taconite seal:TER 23;

Grease Speed Rating Open/Shielded n1:4100 rpm; Accessories:Two Shields; B:33.00 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Dynamic Radial Load Rating C:108000 N; D:140.0000 mm; d:55.000 mm; Basic Static Radial Load Rating Co:90000 N; Fillet Radius ra:2.00 mm;

J min.:196.85 mm; P180°:15.6 kN; RG:1/8 NPT; db:60.325 mm; H1:76.2 mm; End plug (suffix Y):EPR 5; P90°:23.6 kN; L:269.875 mm; Pa:9.79 kN; H:147.637 mm;

G:M 75x2; Axial static load carrying capacity:134 kN; Recommended grub screw tightening torque:8 N·m; B3:3 mm; Mass lock nut:0.35 kg; h:3.5 mm; Associated spanner:HN 15; Grub (set) screw size:M6; d1:81.5 mm; b:8 mm;

Calculation factor Y:1.7; Da max.:514 mm; Cb min.:29 mm; Fatigue load limit Pu:250 kN; a:93 mm; d1 ≈:376.7 mm; D:540 mm; Basic static load rating C0:3050 kN; r1,2 min.:6 mm; Mass bearing:107 kg;

Fillet Radius ra:1.00 mm; d:20.000 mm; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:22500 N; D:52.0000 mm; Basic Static Radial Load Rating Co:14600 N; Accessories:Two Seals & Snap-Rin; B:25.40 mm; Grease Speed Rating n1:8500 rpm; Sealed Speed Rating n3:8500 rpm;

Mass pillow block:125 kg; R2:37.306 mm; Bearing:22234 CCK/W33; Pa:43.6 kN; Housing:SAF 534; PG:1/4 NPT; N1:28.575 mm; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:1 in; h:54.769 mm;

H2:44.45 mm; da:100 mm; A1:111.125 mm; PosiTrac Plus contact element (dc shaft position):B10724-106; J min.:295.275 mm; Stabilizing ring:SR-20-17; Ca:55.804 mm; Labyrinth ring (db shaft position):LOR 118; Lock washer:W 20; R2:30.163 mm;

r1,2 min.:14 mm; C:594 mm; α:20 °; B:594 mm; K:12 mm; Mass bearing:1000 kg; Fatigue load limit Pu:2550 kN; d:571.1 mm; D1 ≈:729 mm; b:22.3 mm;

Calculation factor Y0:2.5; D:314.325 mm; Design variant/feature:TQOS/GW; d:220.662 mm; Calculation factor e:0.4; Comparative radial load rating CF:510 kN; r1,2 min.:1.5 mm; Calculation factor Y2:2.5; r3,4 min.:3.3 mm; D1 ≈:281 mm;

P90°:27.1 kN; R1:34.131 mm; Bearing limiting speed:8500 r/min; H:133.35 mm; Pa:4.14 kN; Cap bolt, SAE grade:5; Stabilizing ring:SR-11-0; R2:15.875 mm; P60°:44.9 kN; h:30.163 mm;

Stabilizing ring:SR-18-15; Taconite seal:TER 188; h:38.1 mm; H:196.85 mm; Housing:FSAFS 518; R2:27.781 mm; A1:98.425 mm; ba:40.481 mm; Pa:10.9 kN; Bearing:22218 EK;

R2:21.431 mm; P150°:19.6 kN; Cap bolt recommended tightening torque:298.3 N·m; h:35.719 mm; Labyrinth ring:2 x LOR 33; P90°:36 kN; ba:40.481 mm; Adapter sleeve assembly:SNW 113x2.1/4; End plug (suffix Y):EPR 7; PG:1/8 NPT;

Dynamic (Cr):7.5 mm; Grease:1560 kN; Pu:1220 kN; with tapered bore:1 500 min-1; rs (min):4 mm; D:300 mm; Static (Cor):13.9 mm; Oil:150.170 kN; B:102 mm; d:140 mm;

Mass pillow block:30.8 kg; Initial grease fill:141.75 g; N1:19.05 mm; H2:41.275 mm; J1:53.975 mm; Ca:49.809 mm; P180°:64.9 kN; P150°:54.3 kN; A2:149.225 mm; R1:60.325 mm;